Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 41)

CRT 36-24A/25 Maintenance

wc_tx000640gb.fm 41

4.13 Storing the Machine

When

Follow the procedures below if the machine is to be stored for more

than 30 days.

Maintaining the machine

To prepare the machine for long-term storage:

4.13.1 Drain the fuel tank and the water tank.

4.13.2 Change the engine oil.

4.13.3 Maintain the engine (see below).

4.13.4 Clean the entire trowel and engine compartment.

4.13.5 Remove dirt from the cooling fins on the engine cylinders and on the

blower housing.

4.13.6 Remove the battery from the machine and charge it periodically.

4.13.7 Cover the entire machine and place it in a dry protected area.

Maintaining the engine

• If your machine has a diesel engine, consult your engine owner’s

manual for maintenance instructions.

• If your machine has a gasoline engine:

4.13.8 Disconnect the ignition wires from the spark plugs. Remove the spark

plugs.

4.13.9 Pour approximately 30 ml (1 ounce) of SAE 30W oil into each engine

cylinder through the spark plug opening.

4.13.10 Reinstall the spark plugs, but leave the ignition wires disconnected to

prevent the engine from starting.

4.13.11 Crank the engine for one or two seconds to distribute the oil inside the

engine cylinders.

4.13.12 Reconnect the ignition wires.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 41