Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 23)

CRT 36 Operation

wc_tx000639gb.fm 23

Control locations and functions:

The Ride-On Trowel features a seat with an integrated “operator

presence” system, which works in conjunction with a throttle mounted

switch. This system allows the engine to remain running (idling) with

no operator seated in the seat, as long as the throttle is not depressed.

This system meets all safety requirements and eliminates the need for

a foot-operated “kill switch”.

To familiarize a new operator with the Ride-On Trowel the following

steps should be taken:

3.1.1 With the operator in the seat, show him or her the functions of the

control arms (c) and how to start the machine.

3.1.2 Have the operator practice steering the trowel. A hard concrete slab

slightly wetted with water is an ideal place for an operator to practice

with the machine. For this practice, pitch the blades up approximately

¼" on the leading edge. Start by making the machine hover in one

spot, and then practice driving the machine in a straight line and

making 180° turns. The best control is achieved at full rpm.

Ref. Description Ref. Description

a Right pitch control k Foot pedal (throttle control)

b Fuel tank l Engine choke control

c Control arms m Work light switch

d Operator’s seat with “operator pres-

ence” switch

n Oil pressure indicator light

e Left pitch control o Engine keyswitch

f Rear work light (one each side) p Hour meter

g Water tank q Water spray control

h Work light (one each side) — —

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 23