Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 34)

Maintenance CRT 36-24A/25

34 wc_tx000640gb.fm

4.5 Right-hand Control Arm Adjustment (Right or Left)

See Graphic: wc_gr003732

The arms should be set to be perfectly vertical. Should the arms come

out of adjustment, adjust as follows:

4.5.1 Loosen the jam nuts (d).

4.5.2 Drop the horizontal linkage (e) down to clear the bracket.

4.5.3 Shorten the linkage to move the control arms to the left.

4.5.4 Extend the linkage to move the control arms to the right.

4.5.5 After the control lever has been adjusted to the desired position,

reassemble the nut and the bolt (c) and tighten the jam nuts (d).

4.6 Mounting Float Pans

See Graphic: wc_gr000151

Certain applications may require the use of float pans. Optional float

pans (a) are available, and are used with the machines in the non-

overlapping configuration only.

To mount float pans:

Lift trowel off the ground with the engine off and position the pan

against the blades. Turn pan either to the right or left to engage clip

angles (b) as shown. Remember, the right-hand trowel blades turn

counterclockwise; the left-hand blades turn clockwise.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 34