Wacker Neuson Cub 200 Manual del operador descargar pdf (Pagina 36)

Maintenance Cub 200/300/300 HD

wcghi_tx000721gb.fm 36

4.8 Cleaning the Fan Blades and Motor

See graphic: wcghi_gr004030

To clean the fan blades and motor, carry out the following procedure:

4.8.1 Shut down the machine and allow it to cool.

4.8.2 Disconnect the power cord from the power source.

4.8.3 Remove the fan guard. There are four screws that secure the guard.

4.8.4 Remove the six bolts that secure the top portion of the shell.

4.8.5 Remove the top shell to access the interior of the machine.

4.8.6 Inspect and, if necessary, clean the motor using compressed air.

4.8.7 Clean the fan blades using a brush.

4.8.8 Re-install the top shell using the six bolts.

4.8.9 Re-install the fan guard.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 49 50

Sin comentarios

Wacker Neuson Cub 200 Manual del operador Pagina 36