Wacker Neuson Cub 200 Manual del operador descargar pdf (Pagina 30)

Maintenance Cub 200/300/300 HD

wcghi_tx000721gb.fm 30

4.3 Replacing the Burner Nozzle

See Graphic: wcghi_gr004016

To replace the burner nozzle, carry out the following procedure:

Removal:

4.3.1 Remove the burner. See section Removing and Installing the Burner

Assembly.

4.3.2 Place an adjustable wrench on the large fitting (1) on the nozzle base

(3).

4.3.3 Place another adjustable wrench on the nozzle (2).

4.3.4 Rotate the nozzle counter-clockwise and remove it from the assembly.

Installation:

4.3.5 Install the new nozzle (2) onto the nozzle base (3).

4.3.6 Tighten the nozzle (2) using an adjustable wrench. Rotate the wrench

clockwise.

4.3.7 Re-install the burner assembly. See section Removing and Installing

the Burner Assembly.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Sin comentarios

Wacker Neuson Cub 200 Manual del operador Pagina 30