Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 8)

Safety Information CRT 48

8 wc_si000188gb.fm

1.2 Machine Description and Intended Use

This machine is a ride-on concrete finishing trowel. The Wacker Neuson

Ride-On Trowel consists of a frame onto which are mounted a gasoline or

diesel engine, a fuel tank, a water tank, two gearboxes joined by a drive

shaft, and an operator’s platform with controls and a seat. A set of metal

blades is connected to each gearbox. A ring guard surrounds the blades.

The engine rotates the blades via the gearboxes and a clutch

mechanism. The rotating blades ride on the surface of curing concrete,

creating a smooth finish. The operator, who sits on the operator’s

platform, uses the controls and the throttle pedal to control speed and

direction of the machine.

This machine is intended to be used for floating and burnishing curing

concrete.

This machine has been designed and built strictly for the intended use

described above. Using the machine for any other purpose could

permanently damage the machine or seriously injure the operator or other

persons in the area. Machine damage caused by misuse is not covered

under warranty.

The following are some examples of misuse:

• Using the machine as a ladder, support, or work surface

• Using the machine to carry or transport passengers or equipment

• Using the machine to finish inappropriate materials such as slurries,

sealers, or epoxy finishes

• Operating the machine outside of factory specifications

• Operating the machine in a manner inconsistent with all warnings

found on the machine and in the Operator’s Manual

This machine has been designed and built in accordance with the latest

global safety standards. It has been carefully engineered to eliminate

hazards as far as practicable and to increase operator safety through

protective guards and labeling. However, some risks may remain even

after protective measures have been taken. They are called residual

risks. On this machine, they may include exposure to:

• Heat, noise, exhaust, and carbon monoxide from the engine

• Chemical burns from the curing concrete

• Fire hazards from improper refueling techniques

• Fuel and its fumes, fuel spillage from improper lifting technique

• Personal injury from improper lifting techniques

• Cutting hazards from sharp or worn blades

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 75 76

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 8