Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 39)

CRT 48 Maintenance

wc_tx000642gb.fm 39

5.12 Servicing the Air Cleaner

See Graphic: wc_gr003776

5.12.1 Unlock clamps (a) and remove cover (b).

5.12.2 Remove cartridge (c) from air cleaner body.

The filter can be cleaned by blowing compressed air breadthways

outside and inside the cartridge, at a pressure not greater than 4.9 bar

(70 psi), or by knocking the front of the filter several times against a flat

surface. Replace filter if it appears heavily soiled or damaged.

5.12.3 Carefully clean out air cleaner cover.

NEVER use gasoline or other types of low flash point solvents for

cleaning the air cleaner. A fire or explosion could result.

5.12.4 Install filter in body.

5.12.5 Install cover and lock clamps.

NOTICE: NEVER run engine without air cleaner. Severe engine

damage will occur.

WARNING

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 75 76

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 39