Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 34)

Maintenance CRT 48

34 wc_tx000642gb.fm

5.5 Steering Assist System

See Graphic: wc_gr003773

The steering assist system is comprised of the torsion lever (f), the

torsion lever assembly (g), and the assist link (h). The system preload

must be removed before any other steering components can be

removed or separated. Remove the 1/2-20 x 3.5-inch bolts (i) to unload

the system. To re-apply system preload, re-attach and tighten bolts (i)

to the factory setting.

5.6 Right-hand Control Arm Adjustment (Right or Left)

See Graphic: wc_gr003773

The arms should be set to be perfectly vertical. Should the arms come

out of adjustment, adjust as follows:

5.6.1 Loosen the jam nuts (d).

5.6.2 Drop the horizontal linkage (e) down to clear the bracket.

5.6.3 Shorten the linkage to move the control arms to the left.

5.6.4 Extend the linkage to move the control arms to the right.

5.6.5 After the control lever has been adjusted to the desired position,

reassemble the nut and the bolt (c) and tighten the jam nuts (d).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 75 76

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 34