Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 29)

CRT 48 Operation

wc_tx000641gb.fm 29

4.11 Pitch Adjustment

See Graphic: wc_gr000147

When changing or setting the pitch (angle) of the trowel blades, slow

the machine, set the desired pitch on the left side of the machine, then

adjust the right side to match.

To increase the pitch, turn the pitch control inward (a). Use the pitch

indicator (b) to adjust pitch equally on both right and left trowel blades.

4.12 Emergency Shutdown Procedure

Procedure

If a breakdown or accident occurs while the machine is operating,

follow the procedure below:

4.12.1 Stop the engine.

4.12.2 Close the fuel valve.

4.12.3 Remove the machine from the job site using the wheel kit.

4.12.4 Clean concrete from the blades and the machine.

4.12.5 Contact the rental yard or machine owner for further instructions.

Working Conditions of

Concrete

Suggested Working

Pitch

1. Wet surface working

stage

Flat (No Pitch)

2. Wet to plastic working

stage

Slight Pitch

3. Semi-hard working

stage

Additional Pitch

4. Hard finishing stage

(burnishing)

Maximum Pitch

5-10º

15º

0°

25°

wc_gr000147

20-25º

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 75 76

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 29