Wacker Neuson CRT 48-31V Manual del operador descargar pdf (Pagina 25)

CRT 48 Operation

wc_tx000641gb.fm 25

The Ride-On Trowel features a seat with an integrated “operator

presence” system, which works in conjunction with a throttle mounted

switch. This system allows the engine to remain running (idling) with

no operator seated in the seat, as long as the throttle is not depressed.

This system meets all safety requirements and eliminates the need for

a foot-operated “kill switch”.

To familiarize a new operator with the Ride-On Trowel the following

steps should be taken:

4.3.1 With the operator in the seat, show him or her the functions of the

control arms (c) and how to start the machine.

4.3.2 Have the operator practice steering the trowel. A hard concrete slab

slightly wetted with water is an ideal place for an operator to practice

with the machine. For this practice, pitch the blades up approximately

6,35 mm (¼") on the leading edge. Start by making the machine hover

in one spot, and then practice driving the machine in a straight line and

making 180° turns. The best control is achieved at full rpm.

Ref. Description Ref. Description

a Right pitch control l Engine choke control (if equipped)

b Fuel tank m Work light switch

c Control arms n Glow plug indicator light (if

equipped)

d Operator’s seat with “operator pres-

ence” switch

o Engine keyswitch

e Left pitch control p Hour meter

f Rear work light (one each side) q Water spray control

g Water tank r Oil pressure indicator light

h Work light (one each side) s Alternator charging indicator light

k Foot pedal (throttle control) t Coolant temperature indicator light

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Sin comentarios

Wacker Neuson CRT 48-31V Manual del operador Pagina 25