
BTS 630, 635 10 Maintenance
Operator's manual 53
10.3.3 Tightening the V-belt
Performing preparations
1. Switch off the engine.
Tightening the V-belt
1. Loosen both of the belt guard screws a few turns.
2. Rotate the adjusting screw clockwise until the square nut is flush with the
mark.
3. Tighten both belt guard screws.
Torque 25 Nm.
Item Designation Item Designation
1 Screw (2 pieces) 3 Square nut
2 Adjusting screw
Comentarios a estos manuales