Wacker Neuson BTS 635s Manual del operador descargar pdf (Pagina 36)

8 Initial start up BTS 630, 635

36 Operator's manual

8 Initial start up

8.1 Mounting the cutting attachment on the outside

By default the cutting attachment is mounted in the center of the machine.

The cutting attachment can be mounted on the outside to maneuver around

obstacles that are very close to the cutting line (e.g. curbs or brick walls).

When the cutting attachment is in the external position, using the guide cart

makes it even easier to see the cutting line.

Performing preparations

1. Switch off the engine.

2. Let machine cool off.

3. Detach the cutting blade.

Note: You must detach the cutting blade because otherwise, after the

conversion, the rotation direction of the cutting blade will no longer be the

same as that of the machine.

WARNING

Improper handling can result in injury or serious material damage.

f Read and follow all safety information of this operator's manual, see chapter

Safety.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 79 80

Sin comentarios

Wacker Neuson BTS 635s Manual del operador Pagina 36