Wacker Neuson BTS 635s Manual del operador descargar pdf (Pagina 42)

9 Use and operation BTS 630, 635

42 Operator's manual

Changing the cutting blade

1. To block the shaft, put an Allen wrench into the bore.

Note: If necessary, rotate the spindle until the Allen wrench engages in the

bore.

2. Unscrew and remove the screw together with the thrust washer.

3. Clean thrust washer and spindle of the machine.

4. Place the cutting blade onto the spindle in the correct rotation direction.

5. Place the screw together with the thrust washer in position and tighten.

Torque 23 Nm.

6. Remove the Allen wrench from the bore.

7. Test the new cutting blade for approx. 1 min at maximum speed (without

cutting).

Item Designation Item Designation

1Bore 4Thrust washer

2Spindle 5Screw

3 Cutting blade

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 79 80

Sin comentarios

Wacker Neuson BTS 635s Manual del operador Pagina 42