
Maintenance CRT 48-31V-ES
wc_tx000144gb.fm 26
5. Maintenance
5.1 Periodic Maintenance Schedule
The chart below lists basic trowel and engine maintenance. Refer to engine manufacturer’s
Operator’s Manual for additional information on engine maintenance. A copy of the engine
Operator’s Manual was supplied with the machine when it was shipped. To service the engine, tilt
the seat forward.
Daily Every
20
hrs.
Every
50
hrs.
Every
100
hrs.
Every
200
hrs.
Every
300
hrs.
Grease trowel arms.
Check fuel level.
Check engine oil level.
1
Inspect air filter. Replace as needed.
Check external hardware.
Pressure wash all surfaces until free of
concrete.
2
Check coolant level.
Check oil level in gearboxes.
Grease gearbox input shaft fitting
Grease control linkage.
3
Check drive belt for wear.
Change engine oil.
4
Check fuel filter.
Clean and check spark plug.
Replace oil filter.
Check fan belt.
Replace spark plug.
Replace fuel filter.
Replace gearbox pressure relief valve.
Replace oil in gearboxes.
Change coolant.
1
Check engine oil twice daily (every 4 hours).
2
Pressure wash immediately after use.
3
Manual steering models only.
4
Change engine oil after first 20 hours of operation.
Comentarios a estos manuales