Wacker Neuson BPU 3050A Manual del operador descargar pdf (Pagina 22)

Maintenance

T01093en.fm 22

8.2 Checking engine oil level

f Place the machine upright on a flat surface.

f Remove any dirt around the oil level dipstick.

f Remove the oil level dipstick (1) and wipe it with a clean, lint-free cloth.

f Screw the oil level dipstick all the way back in and pull it out again.

f Check: The motor oil level must be between the lower and upper marks.

f If necessary, pour new engine oil into the opening (2) until the upper mark is

reached on the oil level dipstick (see chapter Technical data for oil type).

f Screw in the oil level dipstick and tighten it by hand.

w c _ g r 0 0 0 0 8 7

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Sin comentarios

Wacker Neuson BPU 3050A Manual del operador Pagina 22