Wacker Neuson GP 2500A Manual del operador descargar pdf (Pagina 33)

GP 2500A Maintenance

3.10 Transport

Let the engine cool before transporting the generator or storing it

indoors, to avoid burns or fire hazards.

When transporting the generator:

3.10.1 Turn the engine fuel valve to the OFF position.

3.10.2 Position the generator level to prevent fuel from spilling.

3.10.3 Secure the generator by tying it down with a suitable rope.

When transporting the machine by hand, be sure to employ manpower

commensurate with the weight of the machine. To avoid back injury

when lifting the machine, bend the knees to pick it up rather than

bending your back only.

3.11 Troubleshooting

Problem / Symptom Reason / Remedy

If engine doesn't start, check

that:

• Engine switch is on "Start".

• Fuel valves under fuel tank and on engine are open.

• Fuel tank has fuel.

• Choke lever is in correct position. Choke should be

closed when starting a cold engine.

• All loads are disconnected from generator.

• Spark plug is in good condition.

• Spark plug cap is tight.

• Engine oil level is adequate.

If engine starts but there is no

power at receptacles, check

that:

• Circuit breaker is closed.

• Connector from generator to control panel is tight.

If engine starts but runs errati-

cally, check that:

• Hose routing from the fuel tank to the engine is cor-

rect. For proper operation, the hose must run

through the bushing in the lifting bracket. Refer to

the Parts Book for illustration.

WARNING

1 2 ... 28 29 30 31 32 33 34 35 36 37 38

Sin comentarios

Wacker Neuson GP 2500A Manual del operador Pagina 33