Wacker Neuson G 70 Manual del operador descargar pdf (Pagina 40)

wc_tx003552gb_FM10.fm

Rammer

Operation

For rammers without oil injection

(BS 50-2, BS 60-2, BS 70-2, BS 65-V, BS 65-V)

If the rammer has a fuel tank (c) but no oil tank, the engine requires a two-cycle

gasoline/oil mixture.

NOTICE: Use only the recommended gasoline/oil mixture to fuel this machine.

Using gasoline alone will severely damage the engine.

Requirements

■ Use only Wacker Neuson two-cycle or other fully synthetic oil meeting the

NMMA TC-W3, JASO FD, or ISO-L-EGD specification.

■ A gasoline/oil ratio in a range from 50:1 to 100:1 can be used. For optimum

engine performance and durability, a 100:1 ratio with a fully synthetic oil meeting

the specification described above is preferred.

■ Mix regular unleaded gasoline and two-cycle engine oil in a separate container

before filling the tank.

■ Refer to the chart below for the proper quantities to use when mixing gasoline

and oil.

wc_gr011466

FUEL RATIO 50:1 FUEL RATIO 100:1

Gasoline Oil Gasoline Oil Gasoline Oil Gasoline Oil

5 liters 100 ml 1 gallon 2.5 oz. 5 liters 50 ml 1 gallon 1.25 oz.

10 liters 200 ml 3 gallons 8.0 oz. 10 liters 100 ml 3 gallons 4.0 oz.

15 liters 300 ml 5 gallons 13.0 oz. 15 liters 150 ml 5 gallons 6.5 oz.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 85 86

Sin comentarios

Wacker Neuson G 70 Manual del operador Pagina 40